Maine Outdoor Wood Boilers Pristine Series Highlights
Heat Exchanger Cleaners
Our outdoor wood furnace Heat Exchanger Cleaners are created using stainless steel twisted tape turbulators. These turbulators maximize the thermal efficiency and heat transfer. Easily accessible from the front of the stove, simply push and pull the Heat Exchanger Cleaner handle. This will remove any build-up of fly ash from the Heat Exchanger tubes.
Constructed out of 409 Stainless Steel, these Heat Exchanger Cleaners have a snug fit and a spiral design. What’s so special about the spiral design? Well that slows down the flow of hot air moving through heat exchanger. Slower flow means better contact with exchanger walls increasing heat transfer efficiencies.
Roller Latch Door System
The Roller Latch Door System allows for effortless operation of the door with its positive pressure latching. The door has clean lines with no protruding surfaces, is flush mounted and has a comfortable handle. Clevis bearing hinges facilitate smooth operation while allowing for easy adjustment of the door if adjustment is required. These doors incorporate a silicon infused fiberglass door rope for longevity and superior moisture acquisition prevention. It is insulated with an interior 5 inches of high temp ceramic insulation, a 3-inch air space, and an exterior cover for a cool-to-the-touch door while still retaining superior heat retention qualities.
Primary Combustion Air Panel
The Air Panels of the Pristine Series are constructed from the same 409 Stainless Steel as the rest of the wood furnace. Where these stand out the air panels enhance the air distribution while mitigating wear and tear on the firebox and structure.
The Air Panel Hook is designed to allow each section to expand and contract independently. This prevents them from cracking the poured refractory Gasification Manifold or piercing the Water Jacket. Additionally, the Air Panels are designed to be replaceable as they age, drastically increasing the lifespan of the outdoor wood furnace.
Gasification Manifold
The Gasification Manifold is a uniquely designed, high temperature poured refractory unit, that injects preheated air directly at the combustion zone. This process drastically increases the burn efficiency, igniting all gases, causing the flame in the second combustion chamber to reach as high as 2,300°F.
Maine Wood Boilers Pristine Series Quick Stats
| Estimated Weight | 1,750 Lbs |
| Width | 46″ |
| Length | 69″ |
| Height | 86″ |
| Firebox Length | 28″ |
| Chimney Size | 6″ |
| Door Size | 18″ x 18″ |
| Supply Size | 1 – 1 1/4″ |
| Return Size | 1 – 1 1/4″ |
| Water Capacity | 190 Gallons |
| Turbo Fan | 3,000 RPM |
| Approximate Sq Ft. | 2,000 – 3,000 |
| Approximate BTU’s | 125,000 |
| Insulation Roof/Walls | R30 |
| 409 Stainless Steel | Yes |
| EPA Certified | Yes |
| Estimated Weight | 2,500 Lbs |
| Width | 54″ |
| Length | 80″ |
| Height | 90″ |
| Firebox Length | 32″ |
| Chimney Size | 6″ |
| Door Size | 20″ x 24″ |
| Supply Size | 2 – 2 1/4″ |
| Return Size | 2 – 2 1/4″ |
| Water Capacity | 240 Gallons |
| Turbo Fan | 3,450 RPM |
| Approximate Sq Ft. | 4,000 – 5,000 |
| Approximate BTU’s | 225,000 |
| Insulation Roof/Walls | R30 |
| 409 Stainless Steel | Yes |
| EPA Certified | Yes |
| Estimated Weight | 3,200 Lbs |
| Width | 56″ |
| Length | 88″ |
| Height | 102″ |
| Firebox Length | 34″ |
| Chimney Size | 8″ |
| Door Size | 22″ x 26″ |
| Supply Size | 2 – 2 1/4″ |
| Return Size | 2 – 2 1/4″ |
| Water Capacity | 290 Gallons |
| Turbo Fan | 3,450 RPM |
| Approximate Sq Ft. | 8,000 – 10,000 |
| Approximate BTU’s | 390,000 |
| Insulation Roof/Walls | R30 |
| 409 Stainless Steel | Yes |
| EPA Certified | Yes |
Other Furnace Features
409 Titanium Enhanced Stainless Steel Firebox & Water Jacket
Developed to withstand the high temperatures of gasification, 409 Stainless Steel provides the best corrosion resistance, maximum heat transfer and strength needed for the firebox and water jacket.
Firebrick Refractory
Durable and custom designed to withstand and store heat used in gasification process to achieve low thermal conductivity for greater energy efficiency.
Easy Maintenance
Insulated rear heat transfer door provides you with easy access to the heat transfer tubes for general cleaning.
Ultra-Temp Insulated Stainless Steel Chimney
Stainless steel inner and outer shell for added durability. Double wall insulated chimney allows the chimney to be easily expandable, with interlocking lengths available.
Water Level Indicator
Easy to read water level indicator will keep you informed when additional water must be added.
Multiple Clean Out Doors
Easily accessible for cleaning.
Easy to use Controls
The Pristine series is thermostatically controlled to offer an even heat throughout your home or business. Our digital illuminated controls are easy to read at all times. Due to their designs they are also economical and easy to replace.
Cost Savings
Crown Royal Stove owners can save approximately 50% – 100% of their annual heating costs. They may also Reduce or even eliminate hot water bills and the dependence on foreign fuels.
Convenience
Depending on the outdoor temperature and size of the unit, our outdoor furnaces only need to be loaded once or twice a day. Since our units are installed outdoors it eliminates dirt, bark, ash, smoke, soot, or insects from inside your home that may have otherwise been there if an indoor unit were installed. It now stays outside where it belongs. With proper installation requirements you may also melt away snow from driveways and sidewalks.
Manufactured with Safety in Mind
With an outdoor stove you eliminate the risk of a house fire, chimney fire, indoor smoke, or carbon monoxide poisoning. Our unique Firebox Safety Latch System prevents the loading door from swinging open too quickly. Each Crown Royal Stove has been rigorously tested to ensure a durable, dependable furnace.